CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   how to increase face mesh no.? (http://www.cfd-online.com/Forums/fluent/30136-how-increase-face-mesh-no.html)

Shankar August 6, 2002 14:32

how to increase face mesh no.?
 
On a particular face which am face-meshing, am not able to increase the mesh no. whatever scheme or intervals I try, what could be the reason?This is the first face being meshed.Thanks.

david August 6, 2002 20:29

Re: how to increase face mesh no.?
 
I faced similar situation.

Did you mesh the edge before meshing the face? Could you try mesh size scheme of the face? .1, .2 or whatever you want.

It should work fine.

DC

Keil August 7, 2002 04:04

Re: how to increase face mesh no.?
 
When you are using tri mesh in 2d model, the maximum face number is 100,000.

This is the default value of GAMBIT.

If you want to make a mesh more than 100,000, you have to change the default value.

Regards,

Keil

Laika August 7, 2002 04:38

Re: how to increase face mesh no.?
 
try to select the option 'remove lower mesh'

Laika, still orbiting

Shankar August 9, 2002 15:48

Re: how to increase face mesh no.?
 
Hello all Thanks for your responses.It helped. Shankar.


All times are GMT -4. The time now is 14:42.