CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how can I specify Porosity in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 21, 2002, 19:39
Default how can I specify Porosity in fluent
  #1
Joka
Guest
 
Posts: n/a
Hi I need your help I modeling a packed bed in fluent5.5 and I don't know yet how can I specify a porous bed parameters like porosity and other.. in Fluent

Joka
  Reply With Quote

Old   August 22, 2002, 14:21
Default Re: how can I specify Porosity in fluent
  #2
Evan Rosenbaum
Guest
 
Posts: n/a
Define Menu, Boundary Conditions Option
  Reply With Quote

Old   August 22, 2002, 15:38
Default Re: how can I specify Porosity in fluent
  #3
Joka
Guest
 
Posts: n/a
Thanx evans but I don't know yet how define menu, and those boundary condition....can u give me any example please
  Reply With Quote

Old   August 23, 2002, 09:44
Default Re: how can I specify Porosity in fluent
  #4
rahul hiwale
Guest
 
Posts: n/a
You have to define that porous jump boundary type in gambit first then only you can see that option in BC panel in Fluent Rahul
  Reply With Quote

Old   August 23, 2002, 15:31
Default Re: how can I specify Porosity in fluent
  #5
sri
Guest
 
Posts: n/a
Hi Joka,

You either have to specify the face zone(3-d) or the edge(2-d) as interior face/edge or porous jump in Gambit. Hope this helps you

Regards, sri
  Reply With Quote

Old   August 23, 2002, 18:50
Default Re: how can I specify Porosity in fluent
  #6
Joka
Guest
 
Posts: n/a
Thanx for help. But as I read through the Fluent manual, I understood that porous jump should be a thin layer so it is more appropriate for filter materials or things alike not for a long length of packed bed. So I am dealing with a packed bed could I use porous jump???

regards, Joka
  Reply With Quote

Old   August 23, 2002, 23:34
Default Re: how can I specify Porosity in fluent
  #7
Jin-Wook LEE
Guest
 
Posts: n/a
I think that porous media is best choice for the simulation of packed bed.

Sincerely, Jinwook
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 13 December 28, 2020 05:16
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 7 March 23, 2018 04:22
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 03:44
Porosity field in Fluent wojciech FLUENT 1 September 20, 2010 12:19
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57


All times are GMT -4. The time now is 06:00.