CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   urgent help needed for meshing in GAMBIT (http://www.cfd-online.com/Forums/fluent/30270-urgent-help-needed-meshing-gambit.html)

chris September 5, 2002 09:18

urgent help needed for meshing in GAMBIT
 
I'm modelling an artificial rectangular channel whit a groyne (perpendicular wall to side wall). The bottom has a local scour around the groyne. I'm using meshing cooper scheme. I have split the top and the bottom surface in three different surfaces in order to refine mesh better. When i refine the mesh edges and apply the cooper meshing scheme, gambit shows in transcript window: " error:out of memory". Gambit and fluent are installed in IBM SP 9076 and i'm working by telnet. The process of meshing volume is possible whit a small number of mesh element (5-6000) and it is very slow. What is the cause? I'm seeking everyone for helping myself, thanks!


All times are GMT -4. The time now is 04:25.