CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

MRF/impeller question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 17, 2002, 10:39
Default MRF/impeller question
  #1
Eric R.
Guest
 
Posts: n/a
Hello everyone.

Are you allowed to have a non-moving object (wall) within a MRF region?

ie.

In a quarter-section model (only modeling a 1/4th region and assuming quadrant-symmetry) of a mixing tank with an impeller, can you insert something like an electical rod heater above the rotating impeller if it would also be in the MRF region? The rod itself will not move, but stay in the one spot. There would be 4 rods in the full cylindrical tank according to the quadrant-symmetry assumption.

Any help anyone can shed on this or even MRF guidelines in general would be greatly appreciated.

Thank you.

-Eric R.
  Reply With Quote

Old   October 18, 2002, 04:37
Default Re: MRF/impeller question
  #2
Laika
Guest
 
Posts: n/a
Yes that's possible.

Your rod is a seperate cell-zone. You just don't make this zone a moving zone.

Laika, still orbiting
  Reply With Quote

Old   October 18, 2002, 11:18
Default Re: MRF/impeller question
  #3
Chris Michaels
Guest
 
Posts: n/a
Thanks Laika. I'll give it a try.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unanswered question niklas OpenFOAM 2 July 31, 2013 16:03
question about uds tanven FLUENT 1 October 27, 2009 09:55
Poisson Solver question Suresh Main CFD Forum 3 August 12, 2005 04:37
CHANNEL FLOW: a question and a request Carlos Main CFD Forum 4 August 23, 2002 05:55
question K.L.Huang CD-adapco 1 March 29, 2000 04:57


All times are GMT -4. The time now is 09:58.