CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

2D mesh from Gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 21, 2002, 23:42
Default 2D mesh from Gambit
  #1
Mavinakere
Guest
 
Posts: n/a
Hi, Is there a possiblity to export the surface mesh from GAMBIT?I'm trying to create zonal hybrid mesh as one of the T-Grid tutorial says. I already have the volume mesh.But i'm not able to export the surface mesh from Gambit.please advice. Thanks in advance. Mavinakere.

  Reply With Quote

Old   October 23, 2002, 05:21
Default Re: 2D mesh from Gambit
  #2
Laika
Guest
 
Posts: n/a
Normally, it should work fine.

Did you specify a solver? Try to specify Fluent5/6 as solver and export the mesh without the option 2D selected. It is a 3d surface mesh you want to export, not a 2d mesh.

Laika, still orbiting
  Reply With Quote

Old   October 23, 2002, 12:44
Default Re: 2D mesh from Gambit
  #3
Mavinakere
Guest
 
Posts: n/a
Well,It's a 3D mesh i understand..and i did specify the solver as fluent 5 and specified all the BC's as wall and an default continum was specified.but when i export..i read errors in exporting.If i specify half of the domain with the BC's and export,the specified BC's are not visible and the fluid continum type is rest of the unspecified domain.it's very strange.. Mavinakere.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
Successive Mesh in Gambit ashish FLUENT 0 April 28, 2006 00:42
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 5 April 21, 2005 13:42


All times are GMT -4. The time now is 15:36.