CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

when to define the boundary of interior

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 25, 2002, 04:02
Default when to define the boundary of interior
  #1
tony
Guest
 
Posts: n/a
hi,i am simulating air flow in house.Now the problem is that how to define the boundary of the door or the window between the rooms?And why?
  Reply With Quote

Old   October 25, 2002, 04:11
Default Re: when to define the boundary of interior
  #2
Laika
Guest
 
Posts: n/a
I don't understand your problem. Just tell Fluent it is a wall. No?

Laika, still orbiting
  Reply With Quote

Old   October 25, 2002, 08:57
Default Re: when to define the boundary of interior
  #3
wind
Guest
 
Posts: n/a
which version of fluent do you use?
  Reply With Quote

Old   October 25, 2002, 09:45
Default Re: when to define the boundary of interior
  #4
Glenn
Guest
 
Posts: n/a
It depends exactly what you want to do. You can set up an "artifical" boundary. If using Gambit, set the plane as an interior. When you see this in Fluent, this plane is in the boundary conditions but it does not affect the results, i.e. You can read values from this plane but the slution acts as if this plane was not there. However if you want this "wall" to have conductive properties etc...I think you set as wall. I dont know how to set up the conductive properties etc.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Domain Imbalance HMR CFX 3 March 6, 2011 21:10
defining flux across face for interior boundary Sandilya Garimella FLUENT 2 October 10, 2009 00:05
New topic on same subject - Flow around race car Tudor Miron CFX 15 April 2, 2004 06:18
Boundary condition : Interior rakib FLUENT 3 June 23, 2000 14:31


All times are GMT -4. The time now is 00:30.