CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Eulerian-Eulerian approach (http://www.cfd-online.com/Forums/fluent/30445-eulerian-eulerian-approach.html)

Pravesh kumar October 29, 2002 12:14

Eulerian-Eulerian approach
 
hi I am using eulerian model.As in my domain air and water are coming in from the top (Boundary condition-Velocity inlet).I have to input the volume fraction of secondary phase and dia of secondary phase . 1.Which volume fraction i have to input .Is it fraction of water in air-water mix.As air and water have different velocities so it will not remain same as the phase with high velocity will not permit the phase with low velocity to come in. 2.I have to input the dia of secondary phase (ie water) Which dia is it?

Thanks in advance. waiting for reply Pravesh


Laika October 29, 2002 13:12

Re: Eulerian-Eulerian approach
 
your secondary phase is the dispersed one. The diameter gives info about how the dispersed phase is distributed.

greetings,

Laika, still orbiting

Pravesh Kumar October 29, 2002 15:14

Re: Eulerian-Eulerian approach
 
Hi But from where i will input the value of diameter before solution. It asks for dia of secondary phase. Thanks for reply



All times are GMT -4. The time now is 17:11.