CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Please, how to setup different initial condition.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 7, 2002, 07:48
Default Please, how to setup different initial condition.
  #1
RAN
Guest
 
Posts: n/a
If have a closed 2-D tube with a film in it, and want to set different pressure between the film(such like at one side is 1 bar another side is 5 bar). How to do this please?
  Reply With Quote

Old   November 8, 2002, 09:51
Default Re: Please, how to setup different initial conditi
  #2
Anders
Guest
 
Posts: n/a
You use the function Solve-initialize-patch.

First, initialise the whole domain with - say - 1 bar. Then, mark the region where you need 5 bars (using Adapt - region). You now have a register containing the limited cells. Use the patch dialog to patch the new pressure into the wanted marked region using the created register.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
transsonic nozzle with rhoSimpleFoam Unseen OpenFOAM Running, Solving & CFD 7 April 16, 2014 03:38
ForcesCoeffs ronaldo OpenFOAM 4 September 14, 2009 07:11
Negative value of k causing simulation to stop velan OpenFOAM Running, Solving & CFD 1 October 17, 2008 05:36
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 11:16


All times are GMT -4. The time now is 17:58.