CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 12, 2002, 13:27
Default boundary condition
  #1
ravi
Guest
 
Posts: n/a
hi, one more thing, what is 'default interior' my mesh looks like this, water should be the fluid but it shows as Default interior because i did not set the continuum is it ok. For the previous question what should be the boundary condition for no flow (xxxxxxxxxxx)? which is the water surface of the fluid in the channel

inlet outlet xxxxxxxxxxxxxxxxxxxxxxx 1 1 1 1 1 1 1 water (interior) 1 1__ __1

1_______________1

wall
  Reply With Quote

Old   November 24, 2002, 02:20
Default Re: boundary condition
  #2
mahdi saniee nezhad
Guest
 
Posts: n/a
Dear sir I have a problem with this title. If it's possible for you please send me your received responses. Very thanks for your attention to my request. With the best regards. Mahdi saniee nezhad

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boundary Conditions Thomas P. Abraham Main CFD Forum 20 July 7, 2013 05:05
Setting outlet Pressure boundary condition using CAFFA code Mukund Pondkule Main CFD Forum 0 March 16, 2011 04:23
Domain Imbalance HMR CFX 3 March 6, 2011 21:10
How exactly the "pressure outlet" bdry condition compute properties on the boundary? yating9901 FLUENT 3 June 28, 2010 12:26
How to set boundary condition in Fluent for the fo Peiyong FLUENT 1 November 10, 2006 12:44


All times are GMT -4. The time now is 17:23.