CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Problems with exporting Gambit mesh to Fluent (http://www.cfd-online.com/Forums/fluent/30514-problems-exporting-gambit-mesh-fluent.html)

Alex Mozharov November 14, 2002 10:07

Problems with exporting Gambit mesh to Fluent
 
Hello ! I try to export mesh file from Gambit v1.3 to Fluent 5.4 but i have some problems . Geometry and grid were valid in Gambit but it are corrupted after export to Fluent. Please , anybody tell me what I can to do ? ( Sorry for bad English )

sincerelly yours , Alex

zhhuang November 15, 2002 03:32

Re: Problems with exporting Gambit mesh to Fluent
 
firstly,ensure you have export the mesh successed,the gambit will give you the result.Secondly,check the your choice,did you select the 2D for 3D problem or choose the 3D for 2D problem.

ravi varma November 15, 2002 09:02

Re: Problems with exporting Gambit mesh to Fluent
 
also check if solver you have selected is FLUENT 5/6 when exporting the mesh from Gambit. if you have 2 or more geometries, check the interface between the faces.

revalin herdianto November 18, 2002 22:39

Re: Problems with exporting Gambit mesh to Fluent
 
When you export your mesh to fluent, please make sure that your t-filter works. Otherwise, fluent won't recognise that gambit file as a valid mesh (.msh. You can check this on the small screen underneath the main screen. Some times, t-filter fails to work because of poor mesh quality. Good luck

mahdi saniee nezhad November 24, 2002 02:17

Re: Problems with exporting Gambit mesh to Fluent
 
Dear sir I have a problem with this title. If it's possible for you please send me your received responses. Very thanks for your attention to my request. With the best regards. Mahdi saniee nezhad



All times are GMT -4. The time now is 17:41.