CGNS import

November 23, 2002, 06:59

Greetings,

I'm using Fluent v5.5 on WinXP. I'm trying to import 5block.cgns that was downloaded from http://www.cgns.org/CGNSFiles/5blocks/5blocks.cgns.gz and it doesnt works. I tried to import this mesh into Fluent 5.5, TGrid 3.4, even in WinNT 4.0 sp5 compatibility mode. The Fluent writes to his console:

> Reading "| tfilter fe2ram -cl -tCGNS -cl -d3 D:\FLUENT.INC\5blocks.cgns"...

CGNS file to RAMPANT file CGNS library is not available on this platform

Read 0 nodes, 0 elements, 0 groups.

Error: no nodes read from input. Error: couldn't filter input file. Done.

Building...

grid,

shell conduction zones, Done.

Any help will be appreciated! Thanks a lot in advance.

br, Anton.

November 23, 2002, 07:58

Use FLUENT V6.0.20. I could able to import! CGNS import is improved in V6.0

November 23, 2002, 06:59	CGNS import	#1
Anton Guest Posts: n/a	Greetings, I'm using Fluent v5.5 on WinXP. I'm trying to import 5block.cgns that was downloaded from http://www.cgns.org/CGNSFiles/5blocks/5blocks.cgns.gz and it doesnt works. I tried to import this mesh into Fluent 5.5, TGrid 3.4, even in WinNT 4.0 sp5 compatibility mode. The Fluent writes to his console: > Reading "\| tfilter fe2ram -cl -tCGNS -cl -d3 D:\FLUENT.INC\5blocks.cgns"... CGNS file to RAMPANT file CGNS library is not available on this platform Read 0 nodes, 0 elements, 0 groups. Error: no nodes read from input. Error: couldn't filter input file. Done. Building... grid, shell conduction zones, Done. Any help will be appreciated! Thanks a lot in advance. br, Anton.

November 23, 2002, 07:58	Re: CGNS import	#2
rk Guest Posts: n/a	Use FLUENT V6.0.20. I could able to import! CGNS import is improved in V6.0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CGNS import in fluent - periodic boundaries.	Bjarne Børresen	FLUENT	2	April 25, 2013 11:12
[GAMBIT] Import CGNS in Gambit	Harkot	ANSYS Meshing & Geometry	7	May 22, 2009 15:41
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug	unoder	OpenFOAM Installation	11	January 30, 2008 20:30
import cgns mesh in comet	clo	Siemens	0	October 30, 2006 03:52
CGNS mesh import and boundaries	Barbaros	CFX	0	May 6, 2004 16:34