|
[Sponsors] |
November 30, 2002, 02:26 |
help on error
|
#1 |
Guest
Posts: n/a
|
Is it possible to look for solution or help files when encountered error while using fluent 5/6 ? I tried to search it but can't find. Or there isn't such a thing? Can somebody help? Thanks.
|
|
November 30, 2002, 15:12 |
Re: help on error
|
#2 |
Guest
Posts: n/a
|
there does not seem to be any interpretation of Fluent errors. atleast not in the manual. what error are you getting. can you print the error on the forum?
|
|
November 30, 2002, 23:55 |
Re: help on error
|
#3 |
Guest
Posts: n/a
|
thanks for your response. When i try to read my mesh file from gambit, it runs as per normal but display messages at the ends of a few lines such as follows:
default-interior Error: access :unbound variable Error object : phase-domain? tunnel Error: access :unbound variable Error object : phase-domain? Error: access :unbound variable Error object : phase-domain? symmetry fluid velocity-inlet-7 wall-5 pressure-outlet 4 shell conduction zone Done. The last few lines seems normal but one of the boundary type which is the name "tunnel" is missing. The names and boundary type i used to specifed in gambit was: (1) Velocity in ------ velocity in (2) Tunnel ----------- wall (3) Train walls ------ wall (4) Pressure out ----- pressure out (5) symmetry --------- symmetry Thanks ...... |
|
December 3, 2002, 14:50 |
Re: help on error
|
#4 |
Guest
Posts: n/a
|
i have come across the 'unbound variable' error as well. the interface between two faces causes this problem. you could try to check the geometry in Gambit and correct the meshing pattern between two faces.
|
|
December 4, 2002, 06:53 |
Re: help on error
|
#5 |
Guest
Posts: n/a
|
thanks a lot for your help. i will try to check all the faces and the meshing.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 19:00 |
c++ libraries and solver compiling | vaina74 | OpenFOAM Installation | 13 | February 3, 2012 18:43 |
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug | unoder | OpenFOAM Installation | 11 | January 30, 2008 21:30 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 18:51 |
user defined function | cfduser | CFX | 0 | April 29, 2006 11:58 |