CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Error Messages !

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 4, 2002, 12:47
Default Error Messages !
  #1
Bharath
Guest
 
Posts: n/a
Hello there..

What does it mean ..when You get a message which says "Divergence detected in AMG Pressure Solver,Pressure Correction " ??

What should be done to rectify that ?

Thanks

Bharath
  Reply With Quote

Old   December 4, 2002, 14:14
Default Re: Error Messages !
  #2
Erwin
Guest
 
Posts: n/a
Try smaller URF values for pressure and momentum. Converge incompressible flow before compressible option is used. Set pressure limits to something reasonable to avoid pressures of 1 Pa.
  Reply With Quote

Old   December 5, 2002, 12:35
Default Re: Error Messages !
  #3
Bharath
Guest
 
Posts: n/a
Hello

Thanks for the comment.I would also like to knw ..abt another Error Message...which says .. "Error:>(greater than):Invalid Argument [2] :wrong type [not a number ] Error Object:Inf"

could u explain me this ?

Thanks

Bharath
  Reply With Quote

Old   December 6, 2002, 10:56
Default Re: Error Messages !
  #4
Erwin
Guest
 
Posts: n/a
This could be anything. I just had a weird case with similar messages, and it turned something was wacky in the residual monitors. I corrected by reducing the storage number to 500 which apparently got rid of the offending critter.

From the looks of it something is wrong in your input. Check all of your inputs very very carefully.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:26.