CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

A ambiguous information.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 11, 2002, 05:04
Default A ambiguous information.
  #1
Raintung
Guest
 
Posts: n/a
When I use gambit2.0.4 to create mesh(a thin fence on the endwall),the following information appears:

bf43046 has skewness 0.951522>0.95 PRISM LAYER GRAWTH HALTED DUE TO QUALITY PROBLEMS! lAST lAYER AUTOMATICALLY REMOVED,LEAVING 0.TGlib received signal SIGSEGV(segmentation violation)ERROR TG_MESH_DOMAIN failed with error code! Tetradedral meshing has failed for the volume.This is usually caused by problems in the face meshes.check the skewnesses of your face meshes and make sure the face mesh sizes are not too large in areas of small gaps. What does the information mean?I have tried my best to modify,but failed! Help,please!Thank you.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help needed for defining an source term utilizing face information ximik FLUENT 2 May 10, 2011 18:40
interchanging face information with cell information/ radiation flux UDF ximik FLUENT 1 May 4, 2011 17:34
information from saved data files:Unsteady flow Atul FLUENT 5 July 27, 2008 21:05
Information - SES Giovanni Main CFD Forum 0 March 2, 2004 14:17
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 02:42.