CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

problem in results

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 13, 2002, 08:33
Default problem in results
  #1
F-H
Guest
 
Posts: n/a
I am modelling the laminar flow in the curved duct of square cross section. My problem is when I use the low Dean number equal 150, I have two counters rotating secondary vortices. Or the critical Dean number in my geometry is 150 (ie at Dn=150, logically I found four counters rotating secondary vortices) Please give me some help, Thank you.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 9 November 22, 2011 11:02
combustion problem mcnair CFX 9 March 22, 2011 15:06
Problem with cfx Solver Results Ordoumpozanis CFX 4 August 27, 2008 11:54
Problem with reconstructing parallel results qtian OpenFOAM Running, Solving & CFD 1 May 15, 2008 17:30
benchmark results stefan CD-adapco 3 September 10, 2001 09:48


All times are GMT -4. The time now is 20:20.