CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

pressure loss

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 17, 2002, 04:42
Default pressure loss
  #1
olivier
Guest
 
Posts: n/a
Hi everybody. Question about pressure loss calculation. Have anyone experience using Fluent to calculate pressure losses. What are the better turbulence model and what are the better all functions to calculate pressure losses in a simple geometry (as a tube) For instance fluid is water, Diameter = 0,5m ; Re=50000 thanks for your help Olivier
  Reply With Quote

Old   December 17, 2002, 09:05
Default Where can I find examples of porous?
  #2
wujianq
Guest
 
Posts: n/a
I have many problems about porous media and heat exchanger.If someone have done such examples, please be so kind to let me know. Thank you!
  Reply With Quote

Old   December 18, 2002, 09:03
Default What does the model belong to?
  #3
WJQ
Guest
 
Posts: n/a
The model is to simulate the flow and thermal fields in the cylinder. When the air flows through one row heat exchanger in the middle of the cylider, the heat transfer occurs between the air and water. What type does the exchanger belong to? Porous media, porous-jump, radiator, or heat exchanger? Please help me. Thank you!
  Reply With Quote

Old   December 18, 2002, 15:09
Default Re: pressure loss
  #4
Evan Rosenbaum
Guest
 
Posts: n/a
As always, the appropriate turbulence model depends on the conditions. For laminar through middle of the road values of Re and relatively smooth (i.e., commercial steel or better) pipe, the k-epsilon has given us good results in the past. If you have very rough surfaces and a sharp pressure gradient in the boundary layer k-epsilon is less accurate (although I don't know exactly why).
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Pressure loss due to sudden expansion in pipe flow Ahmed FLUENT 0 January 2, 2006 11:01
pressure loss Babu FLUENT 1 March 21, 2005 12:05
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 22:02
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 06:13


All times are GMT -4. The time now is 21:27.