CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

HELP! divergence detected in AMG solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 1, 2003, 22:20
Default HELP! divergence detected in AMG solver
  #1
ann
Guest
 
Posts: n/a
I'm calculating a stage of axial compressor, but when I began iterating, it will appear such error:

Error: divergence detected in AMG solver: pressure correction

Error Object: ().

I have tried to reduce the under-relaxation factors of pressure and it's useful in some cases. Later, I increase the grid number and I also adopt the above measures, after about 2000 iteration the above error appeared again.

Could anyone tell me how I should do and what I should do?

Thanks for any help!

regards ann

  Reply With Quote

Old   January 2, 2003, 21:10
Default Re: HELP! divergence detected in AMG solver
  #2
zhhuang
Guest
 
Posts: n/a
ann check your B.C first!And the initial condition is also important .
  Reply With Quote

Old   January 3, 2003, 05:01
Default Re: HELP! divergence detected in AMG solver
  #3
ann
Guest
 
Posts: n/a
zhhuang,thanks for your response!

My calculating case is obtained from NACA report. The inlet B.C. is inlet total pressure(about 67,000),inlet total temperature (300k) ,inlet initial gauge pressure ( 65000) and hydraulic diameter 0.0502meter(the pitch). The outlet B.C. is 74000.

Any problems do you think?

Thanks in advance!

Regards, ann

  Reply With Quote

Old   January 4, 2003, 02:27
Default Re: HELP! divergence detected in AMG solver
  #4
zhhuang
Guest
 
Posts: n/a
ann, I think you can use the 1st order method firstly then use the 2nd order ,this maybe can help you! zhhuang
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 12:34
ERROR: divergence detected in AMG solver black mamba Main CFD Forum 0 April 19, 2010 16:15
divergence detected in AMG solver !!! yansheng FLUENT 0 September 27, 2007 12:22
DIVERGENCE detected in AMG solver ENTHALPY MANOJKUMAR FLUENT 2 December 25, 2005 10:54
divergence detected in AMG solver: Shekhar Jain FLUENT 1 September 18, 2003 10:31


All times are GMT -4. The time now is 06:50.