|
[Sponsors] |
January 10, 2003, 16:18 |
gambit geometry
|
#1 |
Guest
Posts: n/a
|
Hi there please check the link below and solve the problem i am facing with making this complex geometry. regards.
http://bama.ua.edu/~dhand001/gambit.htm |
|
January 10, 2003, 21:46 |
Re: gambit geometry
|
#2 |
Guest
Posts: n/a
|
So far I got.... there is a problem creating the face.. the frustum in not face there it could be either volume or emty. If volume then u need to joint that two volumes to reach the face C, if emty then there is no connection (face) with the main volume, only line connetion exit that means no fluid flow..
Am I clear...? if not then tell me what is differnce..I hope i Can help u Alamgir |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[GAMBIT] how to mesh a 3d spiral geometry in gambit | seyedashraf | ANSYS Meshing & Geometry | 9 | July 4, 2013 06:42 |
create turbine geometry with gambit | badlaine | ANSYS Meshing & Geometry | 2 | March 27, 2012 00:54 |
[GAMBIT] meshing in GAMBIT, a flow through a pipe having complex inflow geometry | mazhar1613 | ANSYS Meshing & Geometry | 1 | January 12, 2012 00:18 |
What can I employ to create geometry besides Gambit? | summer | ANSYS Meshing & Geometry | 2 | February 11, 2011 15:50 |
problem about Importing geometry in Gambit | Hua Gu | FLUENT | 3 | April 2, 2002 15:24 |