CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help Needed: High aspect ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 24, 2003, 04:15
Default Help Needed: High aspect ratio
  #1
Michelle
Guest
 
Posts: n/a
I'm doing a model of rotating disc in enclosed area. The distance between each corotating disc is very small compared to the geometry of the box. However the flow is supposed to be turbulence (with boundary layer). But the current result that I have only the laminar flow present at the gap. Can I use grid adaption to refine the elements? Or is that any other way to tackle this problem? I'm trying to reproduced the shrouded corotating disc effect as in Abrahamson experiment..
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
High aspect ratio oort OpenFOAM 5 September 16, 2011 14:06
pressure eq. "converges" after few time steps maddalena OpenFOAM Running, Solving & CFD 69 July 21, 2011 07:42
High Aspect Ratio elements Flavio CFX 2 November 24, 2006 13:01
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12
Aspect Ratio at high turbulent and swirled flows zago FLUENT 0 May 19, 2004 02:37


All times are GMT -4. The time now is 17:07.