CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   problem with fluent in batch mode (http://www.cfd-online.com/Forums/fluent/30907-problem-fluent-batch-mode.html)

Pat February 7, 2003 14:59

problem with fluent in batch mode
 
hello ,

here is my problem: I try to use gambit and fluent in a batch mode and get the automatisation of the process: Gambit reads a journal file I have written and exports the mesh (mesh.cas). Then Fluent has to read this mesh, check the grid, choose the solver,.... I would like to know how to write the journal to choose the solver.. I have no problem for the reading and the checking of the mesh.

When I write: define/models/solver,

I don' t know what to write to choose Coupled for the Solver, Implicit for the Formulation, 3D for the Space, Steady for the Time and Absolute for the Velocity Formulation.

Thank you for your help Pat

Keil February 12, 2003 02:45

Re: problem with fluent in batch mode
 
Hi,

How about the following expression.

define/models/solver/c-e yes(if you want to choose coupled-explicit solver).

Regards,

Keil

Pat February 13, 2003 14:14

Re: problem with fluent in batch mode
 
I had found the solution, but thank you for your answer, Keil.

Regards,

Pat


All times are GMT -4. The time now is 08:44.