Buil_Grid error

February 12, 2003, 08:52

I am trying to open a Gambit mesh in Fluent and it comes with this error message:

Building...

grid,WARNING: no face with given nodes. Thread 2, cell 913560 Error: Build_Grid: grid error.

Clearing partially read grid.

shell conduction zones, Done.

Thanks for you help fellow CFD users!

February 12, 2003, 09:14

sev,Maybe you want to build 2D mesh,but when you export mesh file,you forget to tick the 2d option in Gambit,you can check this.

regards zhhuang

February 12, 2003, 09:37

Thanks, but no, it's a 3d mesh and i did specify Fluent solver 5/6...

February 12, 2003, 14:04

sev, In Gambit, examine the mesh and check whether it has been constructed properly or re do the mesh construction again.

Dhana

February 12, 2003, 20:09

sev,re-mesh the whole model and check the mesh quality! regards zhhuang

February 12, 2003, 22:47

Make sure all your volumes (solid and fluid zones) are actually meshed, AND are connected. Perhaps one zone is not connected to another zone

February 17, 2003, 04:25

I did remesh it and even restarted from scratch (imported my geometry etc...). This is the exact error message I get: Building...

grid,WARNING: no face with given nodes. Thread 2, cell 913560 Error: Build_Grid: grid error.

Clearing partially read grid.

shell conduction zones, Done.

I will check the connectivity...

exx110 · May 13, 2019, 14:41

god you lot are fucking useless

February 12, 2003, 08:52	Buil_Grid error	#1
sev Guest Posts: n/a	I am trying to open a Gambit mesh in Fluent and it comes with this error message: Building... grid,WARNING: no face with given nodes. Thread 2, cell 913560 Error: Build_Grid: grid error. Clearing partially read grid. shell conduction zones, Done. Thanks for you help fellow CFD users!

February 12, 2003, 09:14	Re: Buil_Grid error	#2
zhhuang Guest Posts: n/a	sev,Maybe you want to build 2D mesh,but when you export mesh file,you forget to tick the 2d option in Gambit,you can check this. regards zhhuang

February 12, 2003, 09:37	Re: Buil_Grid error	#3
sev Guest Posts: n/a	Thanks, but no, it's a 3d mesh and i did specify Fluent solver 5/6...

February 12, 2003, 14:04	Re: Buil_Grid error	#4
Dhanasekaran Guest Posts: n/a	sev, In Gambit, examine the mesh and check whether it has been constructed properly or re do the mesh construction again. Dhana

February 12, 2003, 20:09	Re: Buil_Grid error	#5
zhhuang Guest Posts: n/a	sev,re-mesh the whole model and check the mesh quality! regards zhhuang

February 12, 2003, 22:47	Re: Buil_Grid error	#6
Anton Guest Posts: n/a	Make sure all your volumes (solid and fluid zones) are actually meshed, AND are connected. Perhaps one zone is not connected to another zone

February 17, 2003, 04:25	Re: Buil_Grid error	#7
sev Guest Posts: n/a	I did remesh it and even restarted from scratch (imported my geometry etc...). This is the exact error message I get: Building... grid,WARNING: no face with given nodes. Thread 2, cell 913560 Error: Build_Grid: grid error. Clearing partially read grid. shell conduction zones, Done. I will check the connectivity...

May 13, 2019, 14:41		#8
exx110 New Member Raheem Nabi Join Date: Mar 2019 Posts: 2 Rep Power: 0	god you lot are fucking useless

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
c++ libraries and solver compiling	vaina74	OpenFOAM Installation	13	February 3, 2012 17:43
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug	unoder	OpenFOAM Installation	11	January 30, 2008 20:30
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51
user defined function	cfduser	CFX	0	April 29, 2006 10:58