|
[Sponsors] |
February 17, 2003, 20:58 |
Convergence Problem..!!
|
#1 |
Guest
Posts: n/a
|
Hi all,
I'm using coupled solver to solve 3-D swirler flow..Inviscid solution with about 1.5M tetrahedral cells has converged. Viscous solution failed to converge specially the energy and the continuity residuals which became almost constant around the value 2.0x10E-03...Any advice is highly appreciated.. Amid |
|
February 21, 2003, 16:27 |
Re: Convergence Problem..!!
|
#2 |
Guest
Posts: n/a
|
Try lowering the convergence parameters and try using different types of discretization schemes. Probabaly that will work.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
convergence problem when use pisoFoam, LES for wind tunnel case | Forrest_Lei | OpenFOAM | 3 | July 19, 2011 07:00 |
convergence problem | commonyue | Main CFD Forum | 1 | December 1, 2009 04:54 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 02:17 |
3D Fluid Flow Convergence problem | Emily | FLUENT | 2 | March 21, 2007 23:18 |
Non Convergence of 3D Heat transfer cfd problem | Balraj | Main CFD Forum | 3 | December 9, 2004 01:24 |