Home > Forums > Software User Forums > ANSYS > FLUENT

combined structured and unstructured grids

Mark Forums Read

Reply

Search this Thread

March 5, 2003, 06:00	combined structured and unstructured grids	#1
phil Guest Posts: n/a	I have read that using structured grids causes less overhead in processing time as the grid numbering in simpler. Will I see a significant improvement in processing time if I use a structured grid for part of my model and an unstructured grid in part of the model which is not possible to mesh without using tets?

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] OpenFOAM - structured or unstructured Grids ?	thomasduerr	OpenFOAM Meshing & Mesh Conversion	22	November 24, 2018 23:18
structured and unstructured grids	user	Main CFD Forum	6	November 25, 2010 01:14
combining structured and unstructured grids	Shane	FLUENT	2	January 23, 2007 20:57
structured & unstructured grids	Samir	FLUENT	1	February 7, 2005 00:48
Structured and Unstructured grids	Samir	FLUENT	0	February 5, 2005 21:21

All times are GMT -4. The time now is 07:32.