CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   thermal conditions of walls (http://www.cfd-online.com/Forums/fluent/31108-thermal-conditions-walls.html)

Stefan March 17, 2003 12:29

thermal conditions of walls
 
Hi, i got a problem modelling an adiabatic system. i want to define my walls in a way that there is no energy given from the walls on the system (or let energy escaping from the system) but that the walls temperature is equal to the ones in the fluid cells near the walls. But my problem is that i think i have to put a certain number in the wall temperature textfield in the thermal conditions at the boundary conditions. is there a possibility that the walls have no temperature influence on the flow? Thank you in advance for your help.

zhhuang March 19, 2003 04:44

Re: thermal conditions of walls
 
h=0 will be ok

Stefan March 23, 2003 07:17

Re: thermal conditions of walls
 
ah, now i understand, i am not allowed to switch to the temperature input panel, just stay at the heat flux and keep it at 0. Thank you for your kind help!


All times are GMT -4. The time now is 09:37.