# About Data File and Solving PDE by Fluent

 Register Blogs Members List Search Today's Posts Mark Forums Read

 March 19, 2003, 08:50 About Data File and Solving PDE by Fluent #1 Sebeci Guest   Posts: n/a Hello every body(Please Help) I have two questions. First:I have created a mesh in a simple domain.I want to assign cells with different property.For example to cell one ro1, cell two ro2,(ro is density)and etc.I have done it by writting data file.After reading it with "Fluent" by first iteration those value changes and it ignores data file. Why? Second:Can we solve a partial diffrential equation only by simulating the coefficients of equation in the fluent without paying any attention to physical manner of equation? Does this method is a normal way? If it isn't obvious please ask by e-mail. Thanks Sebeci

 March 20, 2003, 04:08 Re: About Data File and Solving PDE by Fluent #2 Chetan Kadaki Guest   Posts: n/a For the mesh, you state you want to assign two differentiate between two regions. Does the domain consist of one fluid with 2 different sets of initial conditions, and does the fluid mix throughout? Or are we talking of two different fluids? Or are we talking of fluids seperated by a wall? For the case where you have one fluid, but want different initial conditions: after initializing the solution, create an adaption register (adapt-->region, then select the area you want to mark), then patch different values in the adapted area (solve-->initialize-->patch, select register and variable and enter the value, repeat for each value). In the other case, in Gambit, you need to define the different areas as seperate faces/volumes, and then when defining boundary conditions, create two seperate fluids. I don't know if I've answered your question, or if I have helped. Please provide me with more details and specify what it is your trying to do exactly.

 March 25, 2003, 00:48 Re: About Data File and Solving PDE by Fluent #3 Sebeci Guest   Posts: n/a Dear Chetan Thanks for your reply but the domain consist of one fluid with 1 initial condition for every cell that is differ from another cell.Exactly I want to assign different property for cells. For example porosity of cell be differ from the cell neighborhood. I AM LOOKING FOR YOU REPLY THANKS

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post Unseen OpenFOAM Running, Solving & CFD 7 April 16, 2014 03:38 tH3f0rC3 OpenFOAM 7 February 23, 2013 06:37 jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24 ankgupta8um OpenFOAM Running, Solving & CFD 7 January 15, 2011 14:38 nileshjrane OpenFOAM Running, Solving & CFD 8 August 26, 2010 12:50

All times are GMT -4. The time now is 12:43.