CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

3D meshing of helical wire wrapping

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 3, 2003, 08:14
Default 3D meshing of helical wire wrapping
  #1
DINESH
Guest
 
Posts: n/a
Dear friends, My Geometry consists of a cylinder(20mm dia) wrapped with a helical wire of diameter 5mm and pitch of 600mm, enclosed in a hexagonal duct of side length 100mm. The gambit is not able to mesh the 3D geometry....Giving ERROR "vertex types are inconsistent for meshing face with a scheme of submap thus no scheme interval assignment attempted."

If u have any suggestions or dealt with any similar problem earlier please help me.

thanking you Dinesh
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 06:59
[ICEM] Hexa Meshing a helical profile Balakrshnan Ramakrishnan ANSYS Meshing & Geometry 1 August 24, 2010 11:53
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 12:03
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 12:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 07:19.