CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Gambit problem -2D

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 8, 2003, 14:05
Default Gambit problem -2D
  #1
Manan
Guest
 
Posts: n/a
Hi

I am developing a 2D geometry in gambit.Its a simple rectangle with inlet and a outlet.I created the geometry,meshed the edges and the face. Inlet and outlet were given BC as mass flow inlet and outflow. I read in manuals that gambit automatically takes other boundaries as wall and continnum type as fluid. However I am not able to export the mesh into fluent.It gives the following message.

" Warn : Continuum Entity fluid.3 does not contain any valid entity and is not written Warn: Boundary Entity mass_flow_inlet.5 does not contain any valid entity and is not written. .....

No entites were found for mesh export Errors were found during export. Export file was not created "

Any advice on this will be helpful.
  Reply With Quote

Old   April 8, 2003, 17:00
Default Re: Gambit problem -2D
  #2
Alex Munoz
Guest
 
Posts: n/a
Hi

I guess you create the mesh the boundary condition but you forgot to select the edge that correspond to it boundary.

try this Do not assign boundary conditions in gambit It will define some for you then check if it can be exported Let me know if it work!

Regards

Alex Munoz

  Reply With Quote

Old   April 8, 2003, 19:15
Default Re: Gambit problem -2D
  #3
Manan
Guest
 
Posts: n/a
Hi Alex

Thanks for your help. Actually I had allocated the boundary conditions properly but did not turn on the a small button for exporting 2D mesh!!!!! anyways the problem got solved.

Manan

  Reply With Quote

Old   February 13, 2015, 09:43
Default
  #4
New Member
 
Neha
Join Date: Jan 2015
Posts: 1
Rep Power: 0
neharawat23@gmail.com is on a distinguished road
Quote:
Originally Posted by Manan
;105295
Hi Alex

Thanks for your help. Actually I had allocated the boundary conditions properly but did not turn on the a small button for exporting 2D mesh!!!!! anyways the problem got solved.

Manan
HI Manan,
Could you tell me how was your problem solved?...b`coz I am also facing the same problem..

Thanks in ADVANCE....
neharawat23@gmail.com is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit geometry problem cestrin FLUENT 3 July 4, 2012 03:33
[Commercial meshers] Problem with Mesh conversion Gambit msh Foam Rachid BANNARI (Bannari) OpenFOAM Meshing & Mesh Conversion 25 September 11, 2011 08:58
Gambit installation problem Panos FLUENT 4 March 5, 2009 23:44
Problem meshing with Gambit Adrian FLUENT 8 October 7, 2008 09:39
Startup Problem in Gambit 2.2 with WindowXP Win Win Maw FLUENT 3 January 25, 2006 12:09


All times are GMT -4. The time now is 06:48.