CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Help Needed: Gambit Problem (2-D)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 13, 2003, 12:25
Default Help Needed: Gambit Problem (2-D)
  #1
Huawei
Guest
 
Posts: n/a
Hi, My Friends:

I have a problem to plot my calculation domain(2-D). One part of its form is the function of y=tanh(x). Could I find this function in Gambit, and directly use it to plot the form of domain?

(By the way, at present, I used a not good method to plot that part domain(y=tanh(x)). I input many points of this function into Gambit, then connected these points and smooth the curve to build the domain).

If you could take the time and trouble to give me some advice, I would much appreciate it.

  Reply With Quote

Old   April 13, 2003, 15:06
Default Re: Help Needed: Gambit Problem (2-D)
  #2
Alex Munoz
Guest
 
Posts: n/a
Hi Collin

I guess what you should do is to generate your geometry on Autocad and then export it to gambit.

Warning: perhap you will find some edges are not connected therefore you must to fix your geometry before meshing.

Check on this web side how to import files from autocad to gambit

http://www.udel.edu/topics/software/...uide/ugtoc.htm

I don't think you will find a person in this discussion forum that will be able to address that problem. Therefore, I suggest that you contact Fluent user support, perhaps they can give you a better solution

Regards

Alex Munoz
  Reply With Quote

Old   April 13, 2003, 18:16
Default Re: Help Needed: Gambit Problem (2-D)
  #3
Huawei
Guest
 
Posts: n/a
Thank you very much, Alex!
  Reply With Quote

Old   April 13, 2003, 20:45
Default Re: Help Needed: Gambit Problem (2-D)
  #4
Alex Munoz
Guest
 
Posts: n/a
Hi

I forgot to tell you that you can write temperature profile in a surface

Best regards

Alex Munoz
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit geometry problem cestrin FLUENT 3 July 4, 2012 02:33
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
Help needed Centrifugal compressor problem Raghavendra.M FLUENT 0 December 24, 2008 00:44
Problem meshing with Gambit Adrian FLUENT 8 October 7, 2008 08:39
Problem importing iges file to Gambit Tassos FLUENT 0 May 7, 2008 04:28


All times are GMT -4. The time now is 18:40.