CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Presto scheme

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 14, 2003, 04:49
Default Presto scheme
  #1
Christian
Guest
 
Posts: n/a
Hi.

Is it essential for the presto scheme that ALL the celles are hex.

I have a case where there are a small area with tets, otherwise only hex, and I cannot avoid divergence with the presto.

The case does not have a strong swirl, but the results with the standard pressure calc is not correct.

Any suggestions?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
standard Vs PRESTO! scheme parag FLUENT 5 August 14, 2013 00:01
2nd order upwind scheme (Fluent and CFX) Far FLUENT 0 May 22, 2011 02:50
how to understand high resolution scheme and high order scheme iilw1314 Main CFD Forum 3 September 30, 2010 11:43
Definition of limiter function for central dirrerencing scheme sebastian_vogl OpenFOAM Running, Solving & CFD 0 January 5, 2009 12:08
extrapolation in MUSCL scheme Chandra Main CFD Forum 6 February 14, 2007 12:21


All times are GMT -4. The time now is 09:26.