CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Gambit question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 29, 2003, 23:02
Default Gambit question
  #1
xiang
Guest
 
Posts: n/a
Dear friends,

I decomposed a volume into four parts and meshed each part individually,then generated the mesh file for the entire volume. With interval of 3, the resultant mesh file could be read into FLUENT without any problem and I have obtained converged solution with FLUENT solver. However, doing with interval of 2, i got messages as "warning: no face with given nodes. Thread 1, cell 119399. Error: Build-grid error" when reading the resultant mesh file into FLUENT. I thought there might be problem with the mesh for one of the four parts. So I generated the mesh file for each of the four parts and then read these mesh files into FLUENT. They all pass the grid check in FLUENT!Does anybody have idea on this problem? Thank you very much! best wishes, xiang
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit maillage question stage81 FLUENT 0 October 1, 2010 11:06
Gambit question. Pablo Cornejo FLUENT 10 March 10, 2006 10:46
Gambit question LI Y FLUENT 2 April 6, 2003 17:59
a question about Gambit Jack FLUENT 5 February 6, 2003 07:04
an easy question about gambit brian FLUENT 3 December 3, 2002 00:58


All times are GMT -4. The time now is 11:52.