CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

model sucking air in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 19, 2003, 02:34
Default model sucking air in Fluent
  #1
nikhil
Guest
 
Posts: n/a
Hi,

I want to model 2 phase flow in a atomizer. For that on one side of my control volume fuel in entering and from other end it is coming out and air is being sucked from this end depnding on the model solution(means initially no knowledge of sucked air volume). How can we define BCs for the second end??

nikhil
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What different SST turbulent model between Fluent 12.1 and Fluent 6.3 opehterinar81 FLUENT 0 August 24, 2011 06:34
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
heat transfer with s2s radiation model in fluent D. L. FLUENT 3 July 31, 2008 07:40
2D flapping foil- moving ref frame model in Fluent VJ FLUENT 0 October 20, 2007 01:15
*extract volume of air in VOF model Adriano FLUENT 0 April 13, 2007 03:57


All times are GMT -4. The time now is 20:25.