CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

interpolate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 28, 2003, 05:35
Default interpolate
  #1
emma chen
Guest
 
Posts: n/a
Hi,all! I want to simulate the dynamic closure procedure of a pressure limitting valve(cone-shape) with 2d dynamic mesh. I have checked the "mesh motion", all is in order. But after I pressed the "iterate", I got the following error message:

Updating mesh at time level N... done. iter continuity x-velocity y-velocity k epsilon time/iter

10 9.5688e-02 3.7415e-04 3.8567e-04 3.4853e-03 5.7083e-03 0:00:49 90

20 3.6010e-03 1.5293e-05 1.6851e-05 2.4241e-04 1.9986e-04 0:00:31 80 ! 30 solution is converged

30 3.6774e-04 2.7512e-06 2.2732e-06 2.2072e-05 1.2898e-05 0:00:34 70 Flow time = 3.6199999e-06, time step = 1 99 more time steps

Updating solution at time level N... done. Updating mesh at time level N...not all cell got interpolated not all cell got interpolated

Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: ()

What did I do wrongly? Is there anybody who can give me some tipps? Thanks alot.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
interpolate field to sampledPlane nikwin OpenFOAM 5 October 13, 2011 08:31
Interpolate in some points ivan_cozza OpenFOAM Post-Processing 2 April 22, 2009 08:58
Interpolate a boundary condition Xabi OpenFOAM Pre-Processing 0 April 9, 2009 04:23
overflow when interpolate initial result richard CFX 1 June 11, 2008 07:36
interpolate error of boundary profile justin FLUENT 5 June 5, 2007 04:01


All times are GMT -4. The time now is 09:10.