CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Can U find this Solution Report N229 (http://www.cfd-online.com/Forums/fluent/31665-can-u-find-solution-report-n-229-a.html)

Mohamed June 16, 2003 12:00

Can U find this Solution Report N229
 
Hello

I'm looking for a report solution in the FLUENT USC explaining how to create image files from previously saved data files as explained in the link below: http://www.fluent.com/about/news/new...00v9i2/a23.htm

As sayed in the end of the paragraph "Generating image files from previously saved data files ", i'm looking for this "Solution Report 229", but I didn't find. Do u Know in which rubric or link can I find this report. Note : I'm a fluent UCS

Thanks in advance

Mohamed

eric June 17, 2003 12:25

Re: Can U find this Solution Report N229
 
hi, mohamed.

from the FLUENT USC

www.fluentusers.com

choose the link to "online technical support".

once you enter your Username and Password, click on "search solutions and request support". from this page you should be able to search the solutions database for solution #229.

cheers,

eric.

Mohamed June 18, 2003 03:03

Re: Can U find this Solution Report N229
 
Thank you very much Eric

Mohamed June 18, 2003 09:52

Re: Can U find this Solution Report N229
 
Hi Eric

I've done what was indicated in the solution report, But I have always the next error message

> Loading "E:\asperseur\anim\pg22.scm.txt"

1050

Reading "E:\asperseur\anim\jet_PG22_1050.dat"... Done.

Error: cx-name-to-id: cannot find widget:

Error Object: "Select File*Apply"

> Do u have any idea about the source of this error

thanks, Mohamed

eric June 18, 2003 12:04

Re: Can U find this Solution Report N229
 
hi, mohamed.

i'm afraid i don't know the meaning of this error. i double checked just now, and i'm able to access this solution report successfully. do you get the same error when attempting to access any solution report, or just this particular one (#229)?

i you'd like, i can send the report via email to the address you've provided here.

cheers, eric.

Mohamed June 19, 2003 03:28

Re: Can U find this Solution Report N229
 
Dear Eric, thanks for your interest. Sorry , I was not enough clear in my last message.

I Mean I've already recuperated successfully the report 229, I made the adequate modifications in the scheme file...

When I read this "command line" file in Fluent, there is 2 kinds of problem:

1. If first I make file/read/schem/file.scm , it asks me in the GUI to give the name of the 1st data file, OK. Then it returns this message error:

Loading "E:\asperseur\anim\pg22_jou.scm" 1050 Reading "E:\asperseur\anim\jet_PG22_1000.dat"... Done.

Error: cx-name-to-id: cannot find widget: Error Object: "Select File*Apply"
:

Otherwise, once I read the file .scm via file/read/journal/file.scm , it asks me again in the GUI to give the name of the 1st data file, OK [ Then it generates some messages error (Error: eval: unbound variable , Error Object: *eof*), it 's Ok for this error , it doesn't matter.] and such , it becomes possible now to re-read again the scheme file (from: file/read/schem/file.scm) and create those images correctly without error! Do u have any explication for this needless excessive passage by file/read/journal/file.scm !

2. the second problem is that the reading data files process is not automatic, it asks me every time (from GUI) to give the name of the next data file and click OK. Do u now which modification can I make on the script file to make this process completely automatic?

I'm sorry for this long message and for my modest english I'm trying to improve this file ( I'm initiating myself with scheme command to do this) Thanks in advance an have a good day,

Mohamed


All times are GMT -4. The time now is 20:03.