CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mass flow + pressure inlet???

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 23, 2003, 21:35
Default mass flow + pressure inlet???
  #1
whai
Guest
 
Posts: n/a
There is an inlet, whose pressure is 2atm and mass flow rate is 0.001kg/s. How to set the boundary condition which can include both important information? In other words, is it possible to set this inlet as a mass-flow-inlet and at the same time specify the total pressure or set the inlet as pressure inlet puls mass flow information?

Thanks in advance!

whai

  Reply With Quote

Old   June 23, 2003, 21:44
Default Re: mass flow + pressure inlet???
  #2
lee
Guest
 
Posts: n/a
I am not sure if this is correst. You can set mass flow rate inlet, and set operating condition to pressure 2atm.
  Reply With Quote

Old   June 24, 2003, 14:42
Default Re: mass flow + pressure inlet???
  #3
vladimir krejci
Guest
 
Posts: n/a
Hi I would suggest. Set the boundary as a velocity inlet and locate and prescribe the reference pressure (in the menu Define->Operating Conditions) at your velocity inlet. It could work what do you mean? Regards
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Target Mass Flow Rate Nitin FLUENT 9 June 17, 2017 11:30
Compressible flow, no data at the outlet mireis FLUENT 6 September 3, 2015 03:10
CO2 condensor mass flow rate BC at inlet and oulet possible? Boo85 CFX 0 August 17, 2011 23:20
Mass flow inlet B.C. at exit... Jack Keays FLUENT 2 October 6, 2000 09:39


All times are GMT -4. The time now is 22:21.