CFD Online URL
[Sponsors]
Home > Forums > FLUENT

ISAT error and ddasac failure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 15, 2003, 12:56
Default ISAT error and ddasac failure
  #1
Stephen Mattick
Guest
 
Posts: n/a
I'm trying to use FLUENT v6.1 for some supersonic combustion research and am getting one of the following errors:

(1) Error: isat_table init: xscale must be positive: x=0.000000e+00 This error happens when using the EDC model w/ ISAT enabled.

(2) Error: rmap2: ddasac failure. This happens at varying # of iterations when I use the EDC model w/ direct integration (w/o ISAT).

Any suggestions on fixing the problem would be appreciated.

Thanks.

--Stephen
  Reply With Quote

Old   July 18, 2003, 14:57
Default Re: ISAT error and ddasac failure
  #2
KT
Guest
 
Posts: n/a
Try to set the error tolerance lower (e.g. 1e-4 or lower) or use direct integration. If that doesn't work, most likely your case cannot be solved by the solver or it doesn't have a converged solution.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:37.