|July 17, 2003, 00:05||
What's wrong? Non-conform mesh problem!!!
I have set all non-conform interface BC and could have a result.But when I left the fluent solver then start fluent again, I could read the .cas file that I saved before but when it "bulding grid" the error message appeared on control window as below:
Error: %si-create-grid-interface: wta(int) Error Object: (sb1-id . 6) . . . . . Error: inquire-adjacent-threads: wrong type argument (thread) Error Object: 0 . .
Then I could't read .dat file that I saved before.
someone know what's wrong? Please give me a hand
|March 31, 2013, 15:00||
Join Date: Jan 2013
Posts: 3Rep Power: 5
I have same problem but could not get solution.
I have meshed centrifugal pump model in hypermesh 9. then meshed file is exported to gambit for boundary condition. And then simulated in fluent. Whole simulation completes. Then I closed fluent. Then again opened fluent and read case and data file. Now fluent shows error
Error: %si-create-grid-interface: wta(int)
Error Object: (sb1-id . 6)
I can not understand where the problem is. Is it in meshing or grid interface?
Waiting for the reply
|Thread||Thread Starter||Forum||Replies||Last Post|
|udf error||srihari||FLUENT||1||October 31, 2016 15:18|
|SnappyHexMesh for internal Flow||vishwa||OpenFOAM Native Meshers: snappyHexMesh and Others||24||June 27, 2016 08:54|
|Moving mesh||Niklas Wikstrom (Wikstrom)||OpenFOAM Running, Solving & CFD||122||June 15, 2014 06:20|
|2D Mesh Generation Tutorial for GMSH||aeroslacker||Open Source Meshers: Gmsh, Netgen, CGNS, ...||12||January 19, 2012 04:52|
|Problem with Output to .cfx5 mesh||Ben||CFX||4||January 24, 2008 18:47|