CFD Online Logo CFD Online URL
Home > Forums > FLUENT

fluent bench mark casting problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 17, 2003, 02:35
Default fluent bench mark casting problem
Posts: n/a
dear sir, i have been working on fluent6 on a bench mark casting problem solving for both flow and heat transfer.the inlet for the molten metal has been chosen as pressure inlet as the mass flow rate is not known.the gauge total pressure has been assigned 1042.6068pas(with respect to the operating pressure taken as the atm pressure). we are also facing reversed flow during iterations.we presume the problem is with the boundary conditions. please suggest the appropriate boundary conditions.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Continuous casting simulation problem luke.christ FLUENT 3 June 20, 2015 10:31
fluent parallel problem in win7 x64 system dunga82 FLUENT 8 April 19, 2012 20:23
fluent convergence problem josip76 FLUENT 0 May 26, 2011 20:08
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
Fluent boundary conditions problem bobo FLUENT 2 July 3, 2009 06:28

All times are GMT -4. The time now is 07:29.