CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Gambit -Periodic face linking

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 17, 2003, 12:02
Default Gambit -Periodic face linking
  #1
Puneet
Guest
 
Posts: n/a
How do I link the 2 faces in a grid periodically using gambit. The problem is that I am using a grid generated by gridgen and the grid has not been developed bottom up in gambit. Is there any way the faces may be periodically linked and periodic BC's applied to the faces without disturbing the original mesh.
  Reply With Quote

Old   July 18, 2003, 12:16
Default Re: Gambit -Periodic face linking
  #2
Erwin
Guest
 
Posts: n/a
Yes. Use the text interface command:

/define/grid-interfaces/make-periodic
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
[GAMBIT] Periodic BC truffaldino ANSYS Meshing & Geometry 4 June 5, 2011 06:39
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
Gambit face meshing with a common edge stella FLUENT 1 October 28, 2005 05:09


All times are GMT -4. The time now is 09:18.