CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Time Estimation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 21, 2003, 03:53
Default Time Estimation
  #1
Kostas
Guest
 
Posts: n/a
I am running a 3d model of a horizontal three phase separator using VOF model. the lenghth of the separator is 5.8 m and the diameter 1.6 m. Can please someone tell me roughly how many hours I should wait to get a gonverged solution. Or Better How many DAYS? or Months? Thank you i hope that someone will answer.
  Reply With Quote

Old   July 21, 2003, 04:12
Default Re: Time Estimation
  #2
HVN
Guest
 
Posts: n/a
It is difficult to answer to this question because there are a lot of parameters: mesh size, cell type, computer, ...
  Reply With Quote

Old   July 21, 2003, 06:24
Default Re: Time Estimation
  #3
Kostas
Guest
 
Posts: n/a
I just asked for a rough estimation since i am not very familiar with the software.
  Reply With Quote

Old   July 21, 2003, 08:37
Default Re: Time Estimation
  #4
kim
Guest
 
Posts: n/a
At least one week , I think.
  Reply With Quote

Old   July 21, 2003, 08:47
Default Re: Time Estimation
  #5
Konstantinos Voulgaridis
Guest
 
Posts: n/a
thanx kim, i am already running this for 2 days and i didnt know that it will take that long. bye bye
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Time step size and max iterations per time step pUl| FLUENT 27 May 12, 2015 20:04
Hydrostatic Pressure and Gravity miliante OpenFOAM Running, Solving & CFD 132 October 7, 2012 22:50
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM 6 April 12, 2011 11:24
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 22:38.