CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Static Pressure

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 29, 2003, 21:45
Default Static Pressure
  #1
Suresh Balasubramanian
Guest
 
Posts: n/a
how to obtain static pressure in a 3-D model in Fluent?

Is it best to create a point surface close to the wall in the geometry and see the pressure from the surface integral drop down menu? -- or --- is there any better method?

I also want to know what is the difference between area-weighted average & facet average?

Which is the best method (area weighted or facet average) if I want to get the static pressure values using point surfaces?

I would be thankful for your suggestions.

Thanks, Suresh Balasubramanian

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
simple model, difficult outlet Eric CFX 7 May 23, 2014 09:13
Maintaining Static Pressure at Fluid Flow Inlet cdevalve FLUENT 3 January 14, 2012 01:11
How to achieve constant static pressure in inlet? Zou Jianfeng FLUENT 0 October 21, 2008 02:55
Setting static pressure as the inlet BC ruined FLUENT 1 March 21, 2008 15:57
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 06:13


All times are GMT -4. The time now is 17:20.