CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Mixing Plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 8, 2003, 22:36
Default Mixing Plane
  #1
Lee
Guest
 
Posts: n/a
I am using Mixing Plane model. It diverges on first iteration. I already lowered under-relaxation to 0.01.

I suspect that divergence may be caused by misalignment of mixing plane. Mixing plane was aligned neither axial direction or radial direction but with angle. I used axial direction for mixing plane.

Who knows if this can cause divergence? Or what can cause divergence? Thanks~!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixing plane model: too much backflow and does not converge sbhi FLUENT 1 December 4, 2014 01:31
Problem with Mixing plane Mitpostdoc FLUENT 0 July 26, 2011 14:31
Meshing a Mixing Plane in ICEM Will Anderson ANSYS Meshing & Geometry 2 November 9, 2010 10:16
Meshing a Mixing Plane using ICEM Will Anderson FLUENT 0 November 6, 2010 18:08
Mixing plane geometry definition Hbet FLUENT 0 January 18, 2002 08:16


All times are GMT -4. The time now is 12:39.