# LES and combustion in fluent

 User Name Remember Me Password
 Register Blogs Members List Search Today's Posts Mark Forums Read

 August 9, 2003, 05:49 LES and combustion in fluent #1 sukumar Guest   Posts: n/a Hi friends, Is it possible to do LES of turbulent reacting flows in Fleunt. For example, Large eddy simulation of a smple jet flame at a Re = 10000. with regards Sukumar

 August 11, 2003, 04:28 Re: LES and combustion in fluent #2 roof Guest   Posts: n/a I had tried. About coal combustion. But the speed was too slow, I had to give up finally.

 August 11, 2003, 09:28 Re: LES and combustion in fluent #3 sukumar Guest   Posts: n/a Did amyone try with some simple jet flame case or something similar?

 August 11, 2003, 11:08 Re: LES and combustion in fluent #4 roof Guest   Posts: n/a What do you want to know? I had done something about it.

 August 11, 2003, 12:03 Re: LES and combustion in fluent #5 sukumar Guest   Posts: n/a Hi, I want to know more about the implementation strategy of LES models in Fluent as well as how the SGS terms are handled for energy and species equation, For example, in the case of dynamic smagorinsky model, the coefficients Cs are computed separately for all energy, species and momentum equations. Do they consider the incompressible formulation or compressible formulation for combustion problem(the dynamic coefficient).How is the convergence history and the comparison of results with the experimental results? The reference for incompressible and compressible formulation could be obtained from the papers of Moin et. al. in physics of fluids (year between 1990-1992).

 August 12, 2003, 04:24 Re: LES and combustion in fluent #6 roof Guest   Posts: n/a I think you should consider more about imcompressible formulation since both the flow speed and the pressure is not very high in common combustion reaction.AS to Cs and other coefficients in energy and species equations, I think all these can be dealed with well through PDF model and what you should consider is just the reactants,the products and semifinished products in your reaction system. I am not family with the LES model, also this model's coupling with reaction.

 August 12, 2003, 11:42 Re: LES and combustion in fluent #7 sukumar Guest   Posts: n/a Thanks a lot for all the information you have provided about the topic. regards, sukumar

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post chinthakindi Main CFD Forum 5 August 17, 2013 11:56 ex-bmx FLUENT 0 April 23, 2010 18:24 Margherita Cadorin CFX 0 October 29, 2008 06:24 Manu CFX 5 February 25, 2008 17:34 Syaek Main CFD Forum 2 May 31, 2001 13:25

All times are GMT -4. The time now is 10:30.

 Contact Us - CFD Online - Top