CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Large Area Curved Diffuser

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 11, 2003, 11:14
Default Large Area Curved Diffuser
  #1
Sharman Kristy Michael
Guest
 
Posts: n/a
I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations

Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.
  Reply With Quote

Old   August 12, 2003, 23:51
Default Re: Large Area Curved Diffuser
  #2
Sharman Kristy Michael
Guest
 
Posts: n/a
I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations

Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.

  Reply With Quote

Old   August 13, 2003, 03:38
Default Re: Large Area Curved Diffuser
  #3
jinggo
Guest
 
Posts: n/a
hi SKM,too many questions here.have you start drawing this diffuser?and if you have draw this, what is your problem you facing?it seems that you know nothing .
  Reply With Quote

Old   August 13, 2003, 06:37
Default Re: Large Area Curved Diffuser
  #4
Sharman Kristy Michael
Guest
 
Posts: n/a
truly , I am blur and have met dead ends on this. PLEASE HELP!!!!!!!!!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Problem with reference area alfaben STAR-CCM+ 2 September 17, 2011 03:46
Non overlap area fractions saisanthoshm88 CFX 9 April 26, 2011 13:05
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Designing curved diffuser using gambit Sharman Kristy Michael FLUENT 0 August 29, 2003 03:54


All times are GMT -4. The time now is 09:48.