CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to read mesh data from ANSYS (http://www.cfd-online.com/Forums/fluent/31978-how-read-mesh-data-ansys.html)

mspilot August 14, 2003 22:26

How to read mesh data from ANSYS
 
Dear all: Our labor has the ansys6.0 and fluent6.0. I try to use fluen to read the mesh data from ansys but just fail. It seems that only ansys5.4 and 5.5 are acceptable to fluent. Is that right?

Lam August 16, 2003 05:36

Re: How to read mesh data from ANSYS
 
You only can import ansys 5.4 and 5.5. Refer to fluent User's Guide 5.3.6. But I think you should convert it through some universal standard like nastran, step or iges. But I have no idea about that.

emre August 18, 2003 17:06

Re: How to read mesh data from ANSYS
 
In ansys prep7/archive/write, and then in fluent file/import/ansys should work. (I did not check it out in ansys6.0, but I have 6.1, no problem in transfer) regards emre

mspilot August 21, 2003 06:00

Re: How to read mesh data from ANSYS
 
Thank you! I can do it now!


All times are GMT -4. The time now is 00:17.