CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Plot drag coeff,lift coeff VS angle of attack

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 18, 2003, 05:38
Default Plot drag coeff,lift coeff VS angle of attack
  #1
John
Guest
 
Posts: n/a
Hi.

I'm a new user of Fluent 6.

Currently,I'm doing a project. I need to plot drag coefficient, pressure coefficient and lift coefficient against angle of attack. I couldn't find the variables in the XY-Plot. May I know how to set up boundary conditions for changing angle of attack.

Thanks
  Reply With Quote

Old   August 24, 2003, 11:43
Default Re: Plot drag coeff,lift coeff VS angle of attack
  #2
mateus
Guest
 
Posts: n/a
Hi!

What you will have to do is make a separate simulation for each angle of attack. The lift and drag coeficients can be obatined from "solve-monitors-force". To change the angle of attack you should create a new mesh each time - but it would probabilly take to long. if you are dealing with airfoil in wind tunnel you can define tunnel walls as periodic boundaries (place them far away from airfoil). This way you consider wing in allmols infinite space (no effect of walls and other objest in its vicinity). Now you can define the inlet velocity in components - vx and vy - for the desired angle of attack.

hope this helps

MATEUS
  Reply With Quote

Old   August 29, 2003, 14:06
Default Re: Plot drag coeff,lift coeff VS angle of attack
  #3
nikita
Guest
 
Posts: n/a
another suggestion is..for wind tunnel..u set the wall as symmetry
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX convergence problem simulating ogive-cylinders at varied angle of attack jdacosta CFX 6 February 25, 2015 22:42
[Netgen] Import netgen mesh to OpenFOAM hsieh OpenFOAM Meshing & Mesh Conversion 32 September 13, 2011 06:50
how to plot attack angle along with impeller span direction at leading edge wildli FLUENT 0 August 31, 2010 15:47
introducing angle of attack on ICEMCFD HEXA icem beginner Main CFD Forum 3 December 17, 2008 06:05
angle of attack kiran FLUENT 0 September 10, 2004 09:18


All times are GMT -4. The time now is 04:09.