CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   fluent: Text Command for Vector Display (http://www.cfd-online.com/Forums/fluent/32145-fluent-text-command-vector-display.html)

Laurence Wallian September 16, 2003 09:12

fluent: Text Command for Vector Display
 
I reply to my own mail..., which I haven't written in the good discussion (it belongs to "Gravity option in Fluent")

To define "Vector-Display" using Text Command with the option "Clip-to-Range" of the GUI, you can add ..

/display/set/contours/clip-to-range? yes

... before

/display/set/velocity-vectors/auto-scale? no /display/set/velocity-vectors/scale-head 0.1 /display/set/velocity-vectors/color-levels 20 ; /display/velocity-vector ; vector of velocity colored by velocity-magnitude ; minimum value (m/s) 0.0 ; maximum value (m/s) 0.5 ; Scale factor 2 ; Skip every 2

p.s. : It can be useful to add ...

/display/set/velocity-vectors surfaces ()

...in order to show vectors in the whole domain


All times are GMT -4. The time now is 07:02.