CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

tfilter use help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 23, 2003, 05:07
Default tfilter use help
  #1
nabeel mohsin
Guest
 
Posts: n/a
hi, i want to make more than one mesh file to make one.i are using tfilter option.if any body have any other option.please help in this regard nabeel
  Reply With Quote

Old   September 23, 2003, 06:23
Default Re: tfilter use help
  #2
Erwin
Guest
 
Posts: n/a
You can also read multiple mesh files into TGrid to create one combined mesh.
  Reply With Quote

Old   September 23, 2003, 10:11
Default Re: tfilter use help
  #3
Guest
Guest
 
Posts: n/a
Use the following command:

utility tmerge -3d -cl -p ./mesh1.msh ./mesh2.msh combine.msh

You need not use TGRID.
  Reply With Quote

Old   September 24, 2003, 06:57
Default Re: tfilter use help
  #4
nabeel mohsin
Guest
 
Posts: n/a
HI, I WILL TRY IT AND TELL YOU THANKYOU AND BEST WISHES NABEEL
  Reply With Quote

Old   September 24, 2003, 07:01
Default Re: tfilter use help
  #5
nabeel mohsin
Guest
 
Posts: n/a
hi, one more thing these where this comant written and in cmd window i have to in which folder. nabeel
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
tfilter?!! john FLUENT 3 February 2, 2001 19:39
neutral file Sebastien DANIEL FLUENT 2 June 27, 2000 06:01


All times are GMT -4. The time now is 06:54.