CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Air humidity modelling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 24, 2003, 06:36
Default Air humidity modelling
  #1
Chaz
Guest
 
Posts: n/a
Dear.... How to model air humidity in room in segregrate solver? Thank very much T_T Help me pls.
  Reply With Quote

Old   September 25, 2003, 04:39
Default Re: Air humidity modelling
  #2
Chetan Kadakia
Guest
 
Posts: n/a
You can use the VOF model, but I am uncertain how accurate it will be. You will have define two phases. The primary phase is air, and the secondary phase is water vapor. But I'm not sure how you can dipserse the water vapor in the air.
  Reply With Quote

Old   September 25, 2003, 07:16
Default Re: Air humidity modelling
  #3
thomas
Guest
 
Posts: n/a
Hey, I do not know what is the importance of using a seggregated solver for you. According to me you should create a Scalar (UDS) corresponding to the air humidity fraction throught the domain. Like that this scalar will be transport through out your domain. In that case the mixture model is one of the solution possible. Now maybe Fluent already takes into account air humidity transport in a multiphase model, you should check. Hope this help thomas
  Reply With Quote

Old   September 25, 2003, 10:03
Default Re: Air humidity modelling
  #4
Chaz
Guest
 
Posts: n/a
The important of using seggregrated solver because I familiar with this solver than others.

Thank you very much for your (2) answers I'll tryyyyyy
  Reply With Quote

Old   September 25, 2003, 14:51
Default Re: Air humidity modelling
  #5
emre
Guest
 
Posts: n/a
Hi, Air humidity can be processed by solving the species transport equations, you dont need to go to multiphase models. If youre looking for predicted mean vote or predicted percent dissatisfied, you should explicitly write them. Regards emre
  Reply With Quote

Old   October 16, 2003, 04:10
Default Re: Air humidity modelling
  #6
raluca
Guest
 
Posts: n/a
Hi, for a humidity model I tried with 2 speces: air and water vapour. You define allways your properties as fonctions of the mass fraction and I assure you that it works. I validate this kind of model by experimental data. good luck!
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modelling an air filter siw CFX 5 September 13, 2011 12:48
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 07:59
Air bearing modelling Dave Larkham CFX 1 October 19, 2008 19:10
Modelling air flow around a sphere Fergie FLUENT 1 December 5, 2005 16:27


All times are GMT -4. The time now is 00:55.