CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Question for Induction heat

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 1, 2003, 00:01
Default Question for Induction heat
  #1
J.W.Ryu
Guest
 
Posts: n/a
Hello all,

I am considering heat and flow simulation including induction heat mechanism, such as Iron melting with high/low frequency induction heating. Does anybody have experience similar model to this? If yes, could you let me have your idea or method?

Thanks and regards,

J.W.Ryu
  Reply With Quote

Old   October 17, 2003, 12:27
Default Re: Question for Induction heat
  #2
dr
Guest
 
Posts: n/a
hi,

i suggest you go to the following adress: http://www.cranfield.ac.uk/cww/ccc/d...tg/node278.htm

this tutorial might help in your case

i hope this helps

dr
  Reply With Quote

Old   October 20, 2003, 08:08
Default Re: Question for Induction heat
  #3
J.W.Ryu
Guest
 
Posts: n/a
Dear Mr/Ms. Rochaya,

Thanks for your suggestion. But, I can not access adress that you suggested. Could you let me have correct adress?

Thanks and regards,

J.W.Ryu
  Reply With Quote

Old   October 20, 2003, 10:07
Default Re: Question for Induction heat
  #4
dr
Guest
 
Posts: n/a
hi,

you can find te same tutorial on this adress:

http://p2chpd-cluster.univ-lyon1.fr/...tg/node278.htm

I hope this helps

dr
  Reply With Quote

Old   October 23, 2003, 08:22
Default Re: Question for Induction heat
  #5
J.W.Ryu
Guest
 
Posts: n/a
Thanks for your advice. I have read this tutorial, and have tutorial book. What I want to know was the method to simjulate heat transfer from induction heat source. Probably my provious post made you confusion. I am sorry.

J.W.Ryu
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Question concerning the heat capacity Cp tangd OpenFOAM Running, Solving & CFD 1 July 10, 2006 03:25
Simple 2d Heat transfer question Richard FLUENT 2 January 18, 2006 23:49
VISCOUS heat dissipation Joseph CFX 0 October 1, 2004 08:52
Heat flux question? Mark Main CFD Forum 0 February 13, 2004 10:03


All times are GMT -4. The time now is 03:56.