Home > Forums > Software User Forums > ANSYS > FLUENT

Boundaries in FLUENT: various questions.

Mark Forums Read

Reply

Search this Thread

October 1, 2003, 15:22	Boundaries in FLUENT: various questions.	#1
pat Guest Posts: n/a	Hello, I have a few questions and I work on a 3D wing. 1. Do you obtain the same results when you apply a velocity in pff with a given angle (30 degrees) than when you apply a velocity in pff on a 30 degrees swept wing? 2. In FLUENT, how to apply a velocity in pff with this given angle? Initially, I have M=0.4 in pff. I am still a novice in CFD. Your help will be very appreciated... Thanks Pat

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Fluent3DMeshToFoam	simvun	OpenFOAM Meshing & Mesh Conversion	50	January 19, 2020 15:33
CGNS import in fluent - periodic boundaries.	Bjarne Børresen	FLUENT	2	April 25, 2013 11:12
What the differences flow equation of Fluent 6.3 and Fluent 12.1	opehterinar81	FLUENT	0	August 19, 2011 11:55
max. number of boundaries in fluent 6.3	sudha	FLUENT	0	August 10, 2011 03:06
Fluent jobs through pbs	ibnkureshi	FLUENT	5	June 9, 2011 13:43

All times are GMT -4. The time now is 00:56.